SMJ27C512-45JM Legacy Hermetic 512K×8 EPROM Overview
The SMJ27C512-45JM from Texas Instruments is a high-reliability 512K×8 erasable programmable read-only memory (EPROM) engineered for legacy industrial, aerospace, and defense systems. Part of TI’s iconic 27C EPROM family—trusted for decades in mission-critical applications—it provides non-volatile data storage, retaining firmware, calibration data, or fixed programs even when power is disconnected. Its combination of 45ns access time, hermetic J-lead DIP (JM-28) package, and wide temperature range makes it indispensable for maintaining older electronics that demand uncompromised reliability in harsh conditions. IC-Hersteller offers this industrial-grade memory component as part of its portfolio of trusted Texas Instruments semiconductors.
SMJ27C512-45JM Technical Parameters
| Parameter | Wert | Einheit |
|---|---|---|
| Funktion | 512K×8 Erasable Programmable Read-Only Memory (EPROM) | |
| Speicher-Konfiguration | 524,288 × 8 | Bits (512 Kbytes / 4 Mbits total) |
| Access Time (Max) | 45 | ns (at 5V, 25°C) |
| Versorgungsspannungsbereich | 4.5 to 5.5 | V (single supply, CMOS-compatible) |
| Quiescent Power Dissipation (Typical) | 120 | mW (at 5V, standby mode) |
| Paket Typ | JM-28 (J-Lead Dual In-Line Package, 28-pin, hermetic ceramic) | |
| Betriebstemperaturbereich | -55 bis +125 | °C (industrial/military grade) |
Funktionelle Schlüsselmerkmale
| Charakteristisch | Spezifikation |
|---|---|
| Erase/Write Cycles (Min) | 10,000 cycles (UV erase, electrical program) |
| Data Retention (Min) | 10 years (at 25°C, after programming) |
| Logic Family Compatibility | TI 74HC/74HCT CMOS, 54LS TTL (mixed-signal legacy support) |
| Hermeticity Standard | MIL-STD-883 Method 1014 (vacuum-sealed against moisture/contaminants) |
| ESD Protection (Min) | 2kV (human-body model, per MIL-STD-883 Method 3015) |
Advantages Over Alternative Legacy Memory Solutions
The SMJ27C512-45JM outperforms plastic EPROMs, modern flash memory, and generic ROMs, starting with its hermetic JM-28 package. Plastic EPROMs degrade in 3–5 years due to moisture ingress, but this component’s ceramic enclosure and vacuum seal ensure 10+ years of reliable data retention—critical for systems where firmware replacement is impractical. “We replaced plastic 27C512 EPROMs with this model in our industrial PLCs, and firmware corruption incidents dropped from 12% to 0% annually,” confirms a senior engineer at a leading industrial automation brand.
🔥 Meistverkaufte Produkte
TLC555 Timer IC - Präzisionszeitgeber von Texas Instruments im PDIP-8-Gehäuse
Texas Instruments TL081 rauscharmer Operationsverstärker mit JFET-Eingang - DIP-8-Gehäuse
Texas Instruments UC3842 Current Mode PWM Controller - DIP-8 Gehäuse
Texas Instruments LM2937 Spannungsregler im TO-220-Gehäuse - Low Dropout Linear
Its 45ns access time is 30% faster than slower 65ns EPROMs, eliminating boot delays in legacy systems like aerospace avionics or factory controllers. For example, a military radar system relying on a 65ns EPROM took 1.2ms to load firmware; switching to this 45ns model cut load time to 0.8ms, ensuring faster system startup during critical missions.
Unlike modern flash memory (which requires complex programming interfaces), it uses industry-standard UV erase and parallel programming—compatible with legacy programming tools used for 1980s–2000s equipment. This avoids costly software/hardware upgrades for maintaining older systems. As a CMOS EPROM, it also consumes 50% less power than TTL-based ROMs (120mW vs. 240mW in standby), extending battery life in portable test equipment.
🌟 Ausgewählte Produkte
"MAX9312ECJ+ Präzisionsspannungskomparator im DIP-Gehäuse für zuverlässige Leistung kaufen"
Modell 0339-671-TLM-E - Hochleistungs-TLM-E-Gehäuse für erweiterte Funktionalität
1-1415898-4 Connector Housing, Electrical Wire-to-Board, Receptacle, Packaged
1-1462039-7 Electrical Connector, PCB Mount, Through-Hole, 2-Pin Header Socket
Its -55°C to +125°C temperature range further outperforms commercial-grade EPROMs (limited to 0°C–70°C), making it reliable in freezing arctic sensor stations or hot automotive engine bays—environments where plastic EPROMs fail to retain data.
Typical Applications of SMJ27C512-45JM
The SMJ27C512-45JM excels in legacy and mission-critical systems where non-volatile, rugged firmware storage is non-negotiable. Key use cases include:
📩 Kontakt
- Aerospace and Defense (avionics firmware storage, missile guidance system code, satellite ground station calibration data)
- Industrial Automation (legacy PLC firmware, factory machine control programs, high-temperature process equipment code)
- Test and Measurement (ruggedized equipment calibration data, environmental stress test tool firmware, legacy oscilloscope programming)
- Automotive Electronics (legacy ECU firmware, truck fleet diagnostic tool code, vintage vehicle control systems)
- Medical Devices (legacy patient monitor firmware, diagnostic equipment calibration data, portable medical tool programs)
Texas Instruments’ Expertise in Hermetic EPROM Design
As a Texas Instruments product, the SMJ27C512-45JM leverages TI’s 70+ years of leadership in industrial and military-grade semiconductors. TI’s 27C series EPROMs are renowned for meeting strict reliability standards—each unit undergoes rigorous testing, including temperature cycling (-55°C to +125°C), humidity resistance (85% RH at 85°C for 1,000 hours), and hermeticity verification. This commitment to durability has made TI a trusted partner for Boeing, Siemens, and Lockheed Martin, who rely on TI’s legacy EPROMs to maintain critical older systems that cannot be easily replaced with modern memory solutions.
Häufig gestellte Fragen (FAQ)
What is an EPROM, and how does the SMJ27C512-45JM work?
An EPROM (Erasable Programmable Read-Only Memory) is a non-volatile memory that stores data permanently after programming and can be erased (via UV light) and reprogrammed. The SMJ27C512-45JM stores 512Kbytes of firmware or calibration data; it retains data without power, uses parallel pins for fast 45ns read access, and works with legacy UV erasers/programmers—ideal for updating firmware in older industrial or aerospace systems.
Why is 45ns access time important for legacy system firmware loading?
Legacy systems like PLCs or avionics rely on fast firmware loading to start up quickly and respond to real-time tasks. A 45ns access time means the EPROM delivers data 45 billionths of a second after a read request—fast enough to keep up with 22MHz controller clock speeds. Slower 65ns EPROMs cause boot delays (1–2ms longer), which can lead to missed deadlines in time-sensitive applications like factory production line startups or aerospace preflight checks.
How does the hermetic JM-28 package improve reliability in coastal or industrial environments?
Coastal and industrial environments expose electronics to salt, dust, or chemicals that degrade plastic EPROMs. The JM-28’s hermetic ceramic enclosure seals the chip in an inert gas, blocking contaminants, while its J-lead pins create corrosion-resistant solder joints. This design ensures 10+ years of data retention vs. 3–5 years for plastic EPROMs, reducing maintenance costs for hard-to-access systems like offshore oil rig PLCs.
What is the benefit of 10,000+ erase/write cycles for this EPROM?
10,000+ erase/write cycles let engineers update firmware or calibration data repeatedly—critical for legacy systems that require periodic software tweaks (e.g., PLCs in evolving factory lines or test equipment with updated standards). This longevity eliminates the need to stock replacement EPROMs for frequent updates, cutting inventory costs and ensuring system compatibility over decades.
Is the SMJ27C512-45JM compatible with legacy EPROM programmers and erasers?
Yes. It follows the industry-standard 27C512 pinout and programming/erasing protocols, so it works with legacy parallel EPROM programmers (e.g., TI TMS2700) and UV erasers (254nm wavelength). This compatibility avoids costly upgrades to modern programming tools, letting teams maintain older systems with existing equipment—saving time and budget for businesses relying on legacy electronics.
