TAS5086DBTR 8-Channel High-Efficiency Audio Amplifier Overview
The TAS5086DBTR from Texas Instruments is an advanced 8-channel Class D audio amplifier engineered for multi-channel audio systems requiring both power and efficiency. This device delivers robust, low-distortion sound across 8 channels, making it a cornerstone of immersive audio setups in consumer and professional environments. Fabricant de circuits intégrés offers this high-performance solution as part of its portfolio of multi-channel audio semiconductors.
Technical Parameters of TAS5086DBTR
| Paramètres | Valeur | Unité |
|---|---|---|
| Nombre de canaux | 8 | canaux |
| Amplifier Class | Class D | |
| Efficiency (Typical) | 92 | % |
| Total Harmonic Distortion + Noise (THD+N) | 0.05 | % |
| Output Power (per channel, 4??) | 25 | W |
| Type d'emballage | 48-TQFP (Thin Quad Flat Package) | |
Caractéristiques de fonctionnement
| Caractéristique | Spécifications |
|---|---|
| Plage de température de fonctionnement | De -40°C à +125°C |
| Plage de tension d'alimentation | 8V to 26V |
| Signal-to-Noise Ratio (SNR) | 100 dB (A-weighted) |
| Frequency Response | 20 Hz to 20 kHz (??0.5 dB) |
| Caractéristiques de protection | Overcurrent, over-temperature, short-circuit, and DC detection |
Advantages Over Alternative Multi-Channel Amplifiers
The TAS5086DBTR outperforms conventional multi-channel amplifiers in critical areas. Its 8-channel design eliminates the need for multiple 2-channel amplifiers in surround sound systems, reducing component count, PCB space, and installation complexity??key for 7.1 home theater or automotive multi-zone setups.
🔥 Produits les plus vendus
TLC555 Timer IC - Texas Instruments Minuteur de précision en boîtier PDIP-8
Texas Instruments TL081 Low-Noise JFET-Input Op Amp - DIP-8 Package
Texas Instruments UC3842 Contrôleur PWM en mode courant - Boîtier DIP-8
Texas Instruments LM2937 Régulateur de tension en boîtier TO-220 - Linéaire à faible perte
Compared to Class AB alternatives, its 92% efficiency drastically reduces heat generation, allowing smaller heat sinks and more compact enclosures. This is a major advantage for slim soundbars or in-dash automotive systems where space and thermal management are constrained.
Unlike basic Class D amplifiers with higher distortion, its 0.05% THD+N ensures clean audio reproduction across all 8 channels, preventing channel-to-channel variation that can break the illusion of spatial audio. This consistency is critical for immersive formats like Dolby Atmos, where precise channel balancing defines the experience.
🌟 Produits vedettes
"Acheter un comparateur de tension de précision MAX9312ECJ+ en boîtier DIP pour des performances fiables"
Modèle 0339-671-TLM-E - Boîtier TLM-E haute performance pour des fonctionnalités améliorées
1-1415898-4 Connector Housing, Electrical Wire-to-Board, Receptacle, Packaged
1-1462039-7 Electrical Connector, PCB Mount, Through-Hole, 2-Pin Header Socket
The 48-TQFP package further distinguishes it, offering a balance of pin count and board space that simplifies routing compared to larger packages while accommodating the 8-channel functionality. This makes it easier to integrate into both consumer and industrial designs without sacrificing performance.
Typical Applications of TAS5086DBTR
The TAS5086DBTR excels in multi-channel audio systems requiring power, efficiency, and channel consistency. Key use cases include:
📩 Nous contacter
- 7.1 home theater receivers and soundbars
- Automotive premium sound systems with multiple zones
- Professional audio mixers and live sound reinforcement
- Multi-room audio systems and smart home speakers
- Digital signage with integrated surround sound
Texas Instruments?? Expertise in Multi-Channel Audio
As a Texas Instruments product, the TAS5086DBTR leverages decades of innovation in audio semiconductor design. TI is trusted by leading manufacturers for producing multi-channel amplifiers that balance power, efficiency, and sound quality??critical for immersive audio experiences. Each unit undergoes rigorous testing to ensure consistent performance across temperature extremes and operating conditions, making it a staple in both consumer and professional audio systems.
Foire aux questions (FAQ)
Why is 8-channel amplification important for home theater systems?
8-channel amplifiers like the TAS5086DBTR support 7.1 surround sound, which includes 7 speakers and 1 subwoofer, creating a more immersive experience than 5.1 systems. This allows for precise audio localization??hearing rain from above or a car passing behind??enhancing movie and gaming realism.
How does 92% efficiency benefit audio system design?
High efficiency means less power is wasted as heat, reducing the need for large heat sinks. This allows slimmer, more aesthetically pleasing enclosures for soundbars and receivers. In automotive systems, it also reduces strain on the vehicle??s electrical system, improving fuel efficiency in traditional cars or range in EVs.
What advantages does the 48-TQFP package offer for PCB design?
The 48-TQFP package provides a compact footprint with evenly spaced pins, simplifying PCB routing compared to larger or irregularly shaped packages. Its thermal pad enhances heat dissipation, ensuring stable operation in high-power scenarios. This balance of size and functionality is ideal for densely packed multi-channel equipment.
How do the integrated protection features enhance reliability?
Features like overcurrent and short-circuit protection prevent damage if speakers fail or wiring is faulty. Over-temperature protection shuts down the amplifier during extreme heat, while DC detection prevents speaker damage from voltage spikes. These safeguards reduce warranty claims and extend system lifespan.
Is the TAS5086DBTR compatible with both consumer and professional audio formats?
Yes, its wide 8V to 26V supply range, 20Hz to 20kHz frequency response, and 0.05% THD+N make it compatible with consumer formats (Dolby, DTS) and professional standards. This versatility allows manufacturers to use one amplifier model across product lines, reducing design costs.