Overview of the TPS2041B Power Distribution Switch
O TPS2041B is a high-side power distribution switch from Texas Instruments (TI), designed for precision current limiting and robust protection in USB and other power management applications. This device integrates a 50 mΩ N-channel MOSFET and is optimized for 2.7 V to 5.5 V operation, making it ideal for a wide range of industrial and consumer electronics systems. With built-in thermal shutdown, undervoltage lockout, and short-circuit protection, the TPS2041B ensures safe and reliable power delivery in demanding environments.
Especificações técnicas e parâmetros
The following table outlines the key technical parameters of the TPS2041B:
🔥 Produtos mais vendidos
TLC555 Timer IC - Timer de Precisão da Texas Instruments em Pacote PDIP-8
Amplificador operacional de entrada JFET de baixo ruído TL081 da Texas Instruments - Pacote DIP-8
Controlador PWM de modo de corrente UC3842 da Texas Instruments - Pacote DIP-8
Texas Instruments LM2937 Regulador de Tensão Pacote TO-220 - Baixa Queda Linear
| Parâmetro | Valor |
|---|---|
| Gama de tensões de funcionamento | 2.7 V to 5.5 V |
| Resistência de ligação (RDS(on)) | 50 mΩ (typical) |
| Continuous Output Current | Up to 2 A |
| Limite de corrente | 0.5 A to 2.1 A (typical) |
| Quiescent Supply Current | 70 µA (typical) |
| Enable Input Logic | Active High |
| Fault Response Time | 2 µs (typical) |
| Thermal Shutdown | Sim |
| Opções de pacote | SOT-23-5 |
Why Choose This Power Switch Over Typical Alternatives?
The TPS2041B offers several **performance advantages** over standard power distribution switches. Its low on-resistance of 50 mΩ ensures minimal voltage drop and power loss, which is critical in **power-sensitive applications**. Unlike many generic switches, it features a fast fault response time of just 2 µs, enabling rapid protection against overcurrent and short-circuit conditions.
Additionally, the device includes **thermal shutdown** and **undervoltage lockout**, which are not always present in lower-cost alternatives. These features protect both the switch and the load, extending the lifespan of the entire system. The active-high enable input allows for flexible system control, and the low quiescent current of 70 µA supports energy-efficient designs.
🌟 Produtos em destaque
"Comprar MAX9312ECJ+ Comparador de Tensão de Precisão em Pacote DIP para um Desempenho Fiável"
Modelo 0339-671-TLM-E - Pacote TLM-E de alto desempenho para funcionalidade aprimorada
1-1415898-4 Connector Housing, Electrical Wire-to-Board, Receptacle, Packaged
1-1462039-7 Electrical Connector, PCB Mount, Through-Hole, 2-Pin Header Socket
According to industry experts and engineers, the TPS2041B is a **trusted solution** for USB port power management due to its compliance with USB current-limiting requirements and its robust fault protection. Its compact SOT-23-5 package also makes it ideal for space-constrained designs.
Typical Applications of the TPS2041B
The TPS2041B is widely used in a variety of **industrial and consumer electronics** applications, including:
📩 Contactar-nos
- USB Power Distribution – Ensures safe current delivery to USB peripherals
- Notebook and Desktop PCs – Protects internal power rails and USB ports
- Set-Top Boxes – Manages power to external devices
- Telecom Equipment – Provides reliable power switching in communication systems
- Industrial Control Systems – Offers robust protection in harsh environments
Sobre a Texas Instruments (TI)
Texas Instruments is a globally recognized leader in analog and embedded processing semiconductor solutions. With decades of innovation and a commitment to quality, TI delivers reliable, high-performance components that power everything from consumer electronics to industrial automation systems. The TPS2041B is part of TI’s extensive portfolio of power management ICs, known for their **efficiency, protection features, and long-term reliability**.
Perguntas frequentes (FAQ)
1. What is the maximum current the TPS2041B can handle?
The TPS2041B supports a continuous output current of up to 2 A, making it suitable for powering USB ports and other moderate-load applications. It also features a current limit range of 0.5 A to 2.1 A to protect against overcurrent conditions.
2. Does the TPS2041B include thermal protection?
Yes, the TPS2041B includes built-in thermal shutdown protection. This feature automatically disables the switch if the internal temperature exceeds safe operating limits, preventing damage to the device and surrounding components.
3. Can this device be used in USB applications?
Absolutely. The TPS2041B is specifically designed for USB power distribution. It meets USB current-limiting requirements and provides fast fault response, making it ideal for protecting USB ports and connected devices.
4. What is the typical on-resistance of the internal switch?
The internal N-channel MOSFET has a typical on-resistance of 50 mΩ. This low resistance minimizes power loss and heat generation, which is especially important in compact or thermally sensitive designs.
5. What package is the TPS2041B available in?
The TPS2041B is offered in a compact SOT-23-5 package. This small footprint is ideal for space-constrained applications such as portable electronics, embedded systems, and industrial control modules.
Conclusão
The TPS2041B from Texas Instruments is a **high-performance power distribution switch** that combines low on-resistance, fast fault response, and comprehensive protection features. Its compact design and robust performance make it a preferred choice for engineers designing reliable power management systems in USB, industrial, and consumer applications. Backed by TI’s reputation for quality and innovation, the TPS2041B delivers dependable performance in every deployment.
For more information or to source this component, visit our official website at ICManufacturer.com.
