TLV62569DBV Step-Down Converter – Compact Efficiency for Portable Systems
O TLV62569DBV is a synchronous buck converter from Texas Instruments that offers compact, high-efficiency power delivery in space-limited designs. This device is engineered for applications where size, battery runtime, and system simplicity are critical—such as in wearables, IoT edge nodes, and portable medical devices.
With a fixed 2 MHz switching frequency and a fully integrated power MOSFET, the converter allows designers to reduce external component count and system complexity. It supports up to 600 mA output current with excellent load and line regulation, and its quiescent current of just 15 µA makes it an ideal solution for always-on low-power devices.
🔥 Produtos mais vendidos
TLC555 Timer IC - Timer de Precisão da Texas Instruments em Pacote PDIP-8
Amplificador operacional de entrada JFET de baixo ruído TL081 da Texas Instruments - Pacote DIP-8
Controlador PWM de modo de corrente UC3842 da Texas Instruments - Pacote DIP-8
Texas Instruments LM2937 Regulador de Tensão Pacote TO-220 - Baixa Queda Linear
Efficiency and Compactness in One
Unlike traditional DC-DC converters that require bulky external passives or suffer from high standby power, the TLV62569DBV combines integration and power efficiency in a compact SOT-23-5 package. It helps designers meet modern battery-powered design requirements without compromising board real estate or thermal budget.
Its internal loop compensation simplifies design effort, while a Power Save Mode boosts efficiency at light loads. Built-in soft-start and protection features further enhance system reliability, even in harsh operating conditions.
🌟 Produtos em destaque
"Comprar MAX9312ECJ+ Comparador de Tensão de Precisão em Pacote DIP para um Desempenho Fiável"
Modelo 0339-671-TLM-E - Pacote TLM-E de alto desempenho para funcionalidade aprimorada
1-1415898-4 Connector Housing, Electrical Wire-to-Board, Receptacle, Packaged
1-1462039-7 Electrical Connector, PCB Mount, Through-Hole, 2-Pin Header Socket
Technical Parameters – TLV62569DBV
| Parâmetro | Valor |
|---|---|
| Gama de tensão de entrada | 2.5 V to 5.5 V |
| Tensão de saída | Adjustable down to 0.6 V |
| Corrente de saída | 600 mA |
| Frequência de comutação | 2 MHz (fixed) |
| Corrente quiescente | 15 µA (typ) |
| Shutdown Current | <1 µA |
| Eficiência | Até 95% |
| Enable Pin | Active-high logic compatible |
| Caraterísticas de proteção | Thermal shutdown, short-circuit protection |
| Embalagem | SOT-23-5 |
| Operating Temp | -40°C a +125°C |
Advantages Over Conventional Power Modules
Compared to traditional LDOs or bulkier discrete switchers, the TLV62569DBV provides superior power conversion efficiency, especially under dynamic load conditions. Its high switching frequency allows the use of small inductors and capacitors, reducing BOM cost and board size.
Its performance at low load currents, enabled by Power Save Mode, significantly outperforms many alternatives that consume more current even when idle. This makes it an ideal fit for intermittent operation systems where standby power matters.
📩 Contactar-nos
Applications That Benefit from TLV62569DBV
- Wearable Electronics: Efficient regulation maximizes battery runtime in compact form factors.
- IoT Sensor Nodes: Maintains low power draw during sleep cycles and delivers quick wake-up response.
- Medical Portable Devices: Ensures safe, stable power supply to sensitive analog or digital components.
- Battery-Powered Instruments: Helps reduce heat and size, while boosting performance.
- Eletrónica de consumo: Suitable for Bluetooth peripherals, headphones, and smart accessories.
Texas Instruments – Reliability Meets Performance
Texas Instruments has long been a leader in power management solutions, and the TLV62569DBV reflects its commitment to integrated performance, energy efficiency, and system protection. As part of TI’s extensive analog portfolio, this device is supported by comprehensive design resources including EVMs, simulation tools, and reference designs to shorten your development cycle.
Design engineers around the world trust TI’s rigorous testing, quality assurance, and documentation for both consumer-grade and industrial-grade use cases. The TLV62569DBV offers stable operation across temperature, supply voltage, and load current variations—making it a preferred choice for volume production.
FAQs
1. Can the TLV62569DBV operate efficiently with a lithium-ion battery?
Yes. With a 2.5 V to 5.5 V input range, the TLV62569DBV is ideal for single-cell Li-Ion batteries, providing efficient conversion throughout the full discharge curve.
2. What happens when the load current is very low?
In light-load conditions, the device automatically enters Power Save Mode, which maintains high efficiency by reducing switching losses, ideal for battery-sensitive applications.
3. Can I use this in a noise-sensitive analog system?
Yes, its 2 MHz switching frequency allows for easier filtering of switching noise, while its smooth transient response ensures clean power rails for analog circuits.
4. What are the key protection features of the TLV62569DBV?
The device includes over-temperature protection and current-limit protection to prevent damage during fault conditions, enhancing overall system robustness.
5. How does this device simplify PCB design?
Its internal compensation, small footprint, and minimal external components reduce layout complexity and allow for fast design iterations—especially in dense PCB environments.
